Cloverleaf 1kw Pond Heater

The Cloverleaf pond heater is ideal for fish keepers who wish to maintain a warmer pond water temperature during the winter and spring months. This is a great benefit if you want to continue feeding on higher growth food, have fish which are particularly sensitive to colder weather or if you need to treat the pond with a treatment which only works at temperatures above 10 degrees celcius. What's more, the pond will not freeze over as the temperature drops and therefore there is no risk of suffocation for your fish. It is thermostatically controlled to allow for accurate temperature monitoring. This unit must be connected to a pumped flow, not gravity fed. The compact nature of this heater makes it easy to fit in confined spaces.

Two models are available:

• 1kw - for up to 1000gallons ponds (4500lts)
• 2kw - for up to 2000gallons (9000lts)

Specification:

• 1kw power consumption
• 4000lph minimum flow rate with pressure switch
• Thermostatically controlled
• IP55 rated (weatherproof)
• 1.5m cut end cable fitted
• Flexi hosetails plus Solvent weld inlet and outlets
• Dimensions: length 230cm, width 18.5cm, height 18.5cm

These heaters are designed to be pump fed and will not work on a gravity return.

The Heater should ideally be installed at the end of the water return to the pond after Ultraviolet steriliser's and filters such as all in one pressure filters to reduce excessive water back pressure in the heater, the maximum working pressure is 0.3mpa and should not be exceeded as this may lead to water ingress into the electrics of the unit voiding the warranty in the case of failure due to water damage.

This heater must be connected to a fuse of at least 5 amp.